Johns Electric is one of the best LV Distribution Board (DB) panel manufacturers & suppliers in India. All our panels fully comply with all regulatory requirements and are fully tested. Every panel is custom designed and built to customer specifications.


  1. LT Power sub-distribution
  2. Power Metering


Distribution Panel (Lighting MCB/Switch Board Panel) is meant for distribution of power to domestic/office lightning circuits i.e. fan, tube light, refrigerator etc. and is designed for controlling low tension power supply. This is used to provide protection to electrical installations and human beings using them by providing inbuilt protective devices against electric shocks, short circuiting etc. Power metering and sub-metering can also incorporated in these panels.

General Specifications

  • Fixed / Modular design
  • Busbar rating upto -6300A
  • BUSBAR Aluminium / Copper, Electrolytic grade
  • Panel confirm to IS Standards
  • The enclosure is completely assembled in CRCA SHEET 14 SWG (2 mm) Panel Structure and 16 SWG (1.6 mm ) Doors/Cover and 10 swg (3 mm) gland plate
  • Cable room can be installed as many as a single core cables
  • Inner panel structure build from angle support
  • Base frame build from channel base of 100 mm only
  • ENTRY Top or Bottom

Unique Specifications and Advantages

  • Totally customised product
  • High mechanical strength and ensured coated with pure poly urethane.
  • Highest quality standards for every material used in the panel.
  • Strictly follow ISO 9001-2008.
  • Make of the switchgear as per customer choice
  • Compartmentalised/ Non-Compartmentalised panel.
  • They will be installed indoors/ outdoor - as required.
  • All doors will be suitably labelled and marked for convenience of operation & maintenance.
  • Power Control Centre is used for distribution and control of various power source used in industry.
  • Normally Power Control Centres is installed near power source hence fault level is high.
  • It is designed to suit fault level of 50KA or 65 KA for 1 sec.
  • Busbar system in Power Control Centres are designed to suit the fault level as well as temperature rise to 40°C above ambient.
  • Ample space is provided for cable termination.
  • Various protections viz. short circuit, overload, earth fault, under voltage etc. are provided to protect source and equipment.

Technical Parameters and Data

Rated Voltage: 415 ± 5% volt, 3 phase (4 W + E)
Rated Current: 400A,2000A,3000A,6300A
Rated Insulated Voltage: 690V
Rated Frequency: 50 Hz AC Supply
Rated Short-Time Withstand Current : 80 Ka
Initial peak Rated Short-Time Withstand Current : 220KA
Duration of Short Circuit: 1 second
Protection grade of the enclosure : IP54 standard and optional upto IP66
Forms used for internal separation: upto Form 4b
Temperature rise tested enclosure: An ambient temperature of 50°C
Standard colour for Panel: RAL 7032 Siemens Grey (Please contact us for any other colour)
Nine Tank and Oven & Spray based Paint Process